The extrusion line can be used to produce HDPE Spiral corrugated pipe with the inner diameter of up to 3000mm.
Installed gross capacity: 210 KVA, 380V, 50Hz, 3 phase 5 wires.
Cooling water: 8m3/H. Compressed air: 0.6 m3/min.
Overall dimension (LXWXH): 20 m X 9 m X 4.6 m.
One operator each shift and 3-4 workers each shift
| Configuration： |
single screw extruder | 2 sets |
Backsheet composite mould | 1 sets |
| Outer pipe composite mould | 1 set |
| Corrugated pipe unwinding machine | 1 set |
| Forming machine | 1 set |
| Cutting machine | 1 set |
| Stacker | 1set
|
| PLC Industrial programming automatic control system | 1 set |
| Single wall corrugated pipe unit | 1set |
advantage：
1. Light weight
2. Flared connection, good sealing
3. High ring stiffness, high strength
4. Anti-freezing, long service life
5. Easy to install
Krah
pipe, also known as HDPE winding wall tube structure, based on high
density polyethylene resin as the main raw material, USES the hot
winding molding process, based on polyethylene (PP) single wall
corrugated pipe support structure is made with a high ability of special
structure of wall under external pressure pipe inner surface smooth
outside an alien to enhance the product structure, the pipe standard
length is 6 meters, domestic diameter range in 300 mm - 4000 mm, weight
is light, flexible on the whole, is currently the preferred buried
sewage main pipe.
Krah pipe, also known as HDPE winding wall tube structure, based on high density polyethylene resin as the main raw material, USES the hot winding molding process, based on polyethylene (PP) single wall corrugated pipe support structure is made with a high ability of special structure of wall under external pressure pipe inner surface smooth outside an alien to enhance the product structure, the pipe standard length is 6 meters, domestic diameter range in 300 mm - 4000 mm, weight is light, flexible on the whole, is currently the preferred buried sewage main pipe.
English
中文
العربية
русский
Português
